Model: | SK603 |
Category: | Dynamic Torque Sensor |
Capacity: | 5-50,100,200,500,1000Nm |
Rated Output: | 1.0~1.5mV/V |
Product Orgin: | China |
The load cell can be customised for capacity, accuracy, dimension and other parameters. |
SK603 Dynamic torque sensor availabled in 5-50NM / 100NM / 200NM / 500NM / 1000NM is based on non-contact resolver technology, with no friction between the rotating shaft and the signal acquisition device, making them more durable than slip ring rotating torque transducers. Keyed shafts located on either side can be easily connected to the motor and load via couplings. The rotational torque transducers are suitable for torque measurement on motor test benches, agitator torque control, screw locking torque monitoring, engines, pumps, gearboxes and rotating shafts.
Specifications | Technique |
Capacity | 5-50,100,200,500,1000Nm |
Rated output | 1.0~1.5mV/V |
Zero balance | ±1% F.S. |
Non-linearity | 0.2%F.S. |
Hysteresis | 0.2%F.S. |
Repeatability | 0.1%F.S. |
Creep(30min) | 0.1%F.S. |
Temp.effect on output | 0.05%F.S./10℃ |
Temp.effect on zero | 0.05%F.S./10℃ |
Input impedance | 350/700±10Ω |
Output impedance | 350/700±10Ω |
Insulation | ≥2000MΩ/100VDC |
Recommended excitation | ±15V(Output frequency signal) |
Recommended excitation | 24V(Output analog signal) |
Compensated temp range | -10~60℃ |
Operation temp range | -20~60℃ |
Safe overload | 120%F.S. |
Ultimate overload | 150%F.S. |
Cable size | 3m |
IP Class | IP66 |