Model: | NF605 |
Category: | Dynamic Torque Sensor |
Capacity: | 0.1,0.2,0.3,0.5,1,2,3,5Nm |
Rated Output: | 1.0~1.5mV/V |
Product Orgin: | China |
The load cell can be customised for capacity, accuracy, dimension and other parameters. |
SK605 Shaft-to-shaft torque sensor is available in eight different measuring ranges of 0-0.1NM /0- 0.2NM /0-0.3NM/0- 0.5NM / 0-1NM /0- 2NM /0- 3NM / 0-5NM. The dynamic torque sensor is used for torque and speed measurements. Due to the non-contact resolver technology, there is no friction between the rotating shaft and the signal acquisition device, which makes it much more durable than slip ring torque transducers.
Specifications | Technique |
Capacity | 0.1,0.2,0.3,0.5, 1,2,3,5Nm |
Rated output | 1.0~1.5mV/V |
Zero balance | ±1% F.S. |
Non-linearity | 0.2%F.S. |
Hysteresis | 0.2%F.S. |
Repeatability | 0.1%F.S. |
Temp.effect on output | 0.1%F.S./10℃ |
Temp.effect on zero | 0.1%F.S./10℃ |
Input impedance | 350±10Ω |
Output impedance | 350±10Ω |
Insulation | ≥2000MΩ/100VDC |
Recommended excitation | 12V |
Maximum excitation | 20V |
Compensated temp range | -10~60℃ |
Operation temp range | -30~60℃ |
Safe overload | 120%F.S. |
Ultimate overload | 150%F.S. |
Cable size | 3m |
IP Class | IP66 |